Good morning,
We are trying to use the Hydro+ CoolAir model, but we get many no data cells in the output, they seem to all correspond to specific land use. But even if we change that specific code to a different one the problem persists.
We don't understand if that is the problem or it is due to the tree cover or the impervious cover file or what else.
Can you give us any advice? Or do you know if anyone encounters any similar problems?
Thank you for your attention.
CoolAir
Moderators: i-Tree Support, i-Tree Team
-
- Posts: 10
- Joined: Wed Sep 18, 2019 10:26 am
Re: CoolAir
Hi ValeB,
Thanks for your interest in the CoolAir model. I have a few questions to clarify where and how this issue is happening:
Thanks for your interest in the CoolAir model. I have a few questions to clarify where and how this issue is happening:
- Are you seeing no data cells in Heat output, Hydro output, or both?
- Which land cover codes have you tried using so far?
A member of the i-Tree Team
Please provide feedback on our technical support services by clicking here to take our 5 minute survey
Please provide feedback on our technical support services by clicking here to take our 5 minute survey
Re: CoolAir
Hi James.Kruegler,
We tried how you suggested and in the end, we were able to fix the problem.
Thank you so much for your help!
We tried how you suggested and in the end, we were able to fix the problem.
Thank you so much for your help!