Land Cover inputs

Section for FAQs regarding i-Tree Hydro

Moderators: i-Tree Support, i-Tree Team

Post Reply
i-Tree Team
Posts: 59
Joined: Fri May 08, 2015 9:29 am
Location: Syracuse, NY

Land Cover inputs

Post by rcoville » Tue Aug 04, 2015 12:22 pm

What land cover information is needed in i-Tree Hydro?
  • Tree Cover (%)
    • Pervious Cover Beneath Tree Canopy (%; representing land cover under tree cover)
      Impervious Cover Beneath Tree Canopy (%; representing land cover under tree cover)
    Evergreen Tree (%; a percent of a percent, representing how much tree cover is evergreen)
    Evergreen Shrub (%; a percent of a percent, representing how much shrub cover is evergreen)
    Impervious Cover (%)
    • Directly Connected Impervious Cover (%; a percent of a percent, representing a feature of impervious cover)
    Shrub Cover (%)
    Herbaceous Cover (%)
    Soil Cover (%)
    Water Cover (%)

Where do I get land cover information for my project?
You may be able to gather all of this information from local government, field-based surveys, or other sources. The following information is provided as guidelines for obtaining necessary data with minimal field or GIS work, based on common practices for modeling watershed area projects.

For Directly Connected Impervious Cover, please see this forum post about it: viewtopic.php?f=35&t=1233
Specifically, see the answer to "Can you suggest a good way to determine DCIA?"

For Evergreen Tree and Evergreen Shrub cover, various surveys can be performed to estimate this. These values indicate how much of total Tree and total Shrub cover have leafs year-round.
One way to get this information is: download Land Cover data (e.g. from, clip it to the extent of your project area, and then use its updated attribute table to estimate the percentage of Tree/Shrub Cover that is Evergreen Tree/Shrub % using the formula: Evergreen %=(evergreen/(evergreen+deciduous))*100
  • For example, if Evergreen count is 200 and Deciduous count is 600: Evergreen Tree/Shrub % is (200/(200+600))*100=25%
Remaining information can come from an i-Tree Canopy survey of the project area:
You'll need your project area delineated (either manually or pre-processed from local government or other GIS data source) and in the Geographic Coordinate System of i-Tree Canopy/Google Maps: WGS 1984.
You'll also need i-Tree Canopy cover classes to be formatted to inform inputs for i-Tree Hydro. In the i-Tree Archives, under Hydro, we provide an 8 cover class file for this purpose. Once an i-Tree Canopy survey is completed (for example: Standard Error less than or equal to +/- 3.00), results can be exported and opened in spreadsheet software for analysis. Most land cover parameters in i-Tree Hydro come word-for-word from the results of i-Tree Canopy, but some take additional work. Here's a list of how i-Tree Canopy cover classes translate into i-Tree Hydro:
  1. Add Tree/Shrub - Impervious and Tree/Shrub - Pervious together to get Tree Cover. You can split this in half or some other division to account for part of this cover type representing shrub cover.
    • For example, T/S-IC=20% and T/S-PC=10%, and then of total T/S cover users may estimate 60% were Trees and 40% were shrubs (or other distributions may be substituted), so in i-Tree Hydro: total Tree Cover is (20%+10%)*0.60=18% and total Shrub Cover is (20%+10%)*0.40=12%
  2. Determine how much Tree - Impervious and Tree - Pervious represent as fractions of Tree Cover respectively.
    • For example, Tree-pervious/Total Tree Cover multiplied by 100 gives you the percent Pervious Cover beneath Tree Canopy: (10%/30%)*100=33.3% Pervious Cover beneath Tree Canopy).
  3. Add Impervious Building, Impervious Road, and Impervious Other together to get total Impervious Cover.
  4. Remaining cover classes translate directly into i-Tree Hydro: Bare ground/soil = Soil Cover; Water = Water Cover; etc.
By following the above guide you should have good estimates of land cover information to use in Step 2 of i-Tree Hydro.
A member of the i-Tree Team

Please provide feedback on our technical support services by clicking here to take our 5 minute survey
Post Reply